Creating 3-Dimentional Sound Field-3D Phonic; Presetting Automatic Dvd Video Sound Increase Level; Adjusting The Audio Input Level; Adjusting The Audio Output Level - JVC UX-G70 Instructions Manual

Creating 3-dimentional Sound Field
Remote
—3D Phonic
ONLY
• This does not function for MPEG-1/MPEG-2/ASF/DivX
discs.
While playing a disc...
(while holding...)
3D PHONIC ACTION
3D PHONIC OFF
• The selected mode can only be shown on the TV.
ACTION
Suitable for action movies and sports
programs.
DRAMA
Creates natural and warm sound. Enjoy
movies in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
Presetting Automatic DVD Video Sound
Remote
Increase Level
ONLY
DVD Video sound is sometimes recorded at a lower level
than other discs and sources. You can set the increase level
for the currently loaded DVD Video, so you do not have to
adjust the volume when you change the source.
• This only functions for DVD Video and DVD-VR format
disc.
DVD LEVEL
AHB PRO
(while holding...)
NORMAL Original recording level.
MEDIUM Output level is increased (less than "HIGH").
HIGH Output level is increased (more than
"MEDIUM"). (initial setting)
14
3D PHONIC
AUDIO/MPX
3D PHONIC DRAMA
3D PHONIC THEATER
NORMAL MEDIUM
HIGH
(initial setting)

Adjusting the Audio Input Level

If the sound from the component connected to the LINE IN
jack is too loud or is too quiet when changing from another
source to LINE, you can change the audio input level
through the LINE IN jack (without changing the volume
level).
2 sec.
ENTER/SET
L.IN LVL1
L.IN LVL1 Select this when the sound is too loud
with "L.IN LVL 2" selected. This setting
is recommended when connecting an
audio device other than a portable audio
device to the LINE IN jack.
L.IN LVL2 Select this when the sound is too loud
with "L.IN LVL 3" selected.
L.IN LVL3 Select this when listening to a portable
audio device or recording the sound from
it (initial setting).

Adjusting the Audio Output Level

If the recorded sound on the device connected to the LINE
OUT jack is too loud or too quiet, you can change the audio
output level through the LINE OUT jack (without changing
the volume level).
LINE OUT LEVEL
10
(while holding...)
L.OUT LVL1 Select this when recording the sound
with a portable audio device (initial
setting).
L.OUT LVL2 Select this when the recorded sound is
too loud with "L.OUT LVL 1" selected.
Remote
ONLY
L.IN LVL2
L.IN LVL3
(initial setting)
Remote
ONLY
L.OUT LVL1
(initial setting)
L.OUT LVL2