JVC UX-G70 Instructions Manual page 6

~
Powered subwoofer
From the powered
subwoofer
(not supplied)
The subwoofer connected can reproduce the bass sounds
recorded in front left and right channels, but cannot
reproduce the LFE signals in DVD multi-channel discs.
• Before plugging the unit to the main supply, make sure that
the powered subwoofer is turned off.
Ÿ
AM/FM antenna
To assemble the AM loop antenna
To connect AM/FM antenna
AM loop antenna
(supplied)
FM antenna (supplied)
Extend it so that you can obtain the best
reception.
For better AM/FM reception
AM loop antenna (supplied)
Keep it connected.
Vinyl-covered wire
(not supplied)
Extend it horizontally.
4
• Disconnect the supplied FM antenna, and connect to an
SUB -
WOOFER
OUT
!
Connect only component cord at one time.
• To select progressive scanning mode (see page 15), use
• After connecting a TV, select the proper video signal mode
⁄
• Set "DIGITAL AUDIO OUTPUT" in the "AUDIO" menu
FM outdoor antenna
• Digital audio signals are output from this System only when
(not supplied)
outdoor FM antenna using a 75
connector (IEC or DIN45325).
TV/monitor
Green
Component video cord
(not supplied)
COMPONENT jacks.
S-video cord (not supplied)
Composite video cord (supplied)
according to the connection method. See "Changing the
Scanning Mode" on page 15.
Digital audio component
Protective cap
correctly according to the connected digital audio
equipment (see page 37). If the setting is incorrect, loud
noise may be generated causing damage to the speakers.
"DVD/CD" is selected as the source.
Ω
wire with coaxial type
Red
Blue