Draytek Vigor2100V User Manual page 112

Channel Volume To adjust the volume of your VoIP calls. Use these two
buttons
Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP
calling information. The information will update immediately
when the Refresh button is clicked.
Status: To show the VoIP connection status.
IDLE : Indicates that the VoIP function is idle.
HANG_UP : Indicates that the connection is not established (busy
COLLECTING : Indicates that the user is calling out.
WAIT_ANS : Indicates that a connection is launched and waiting for
ALERTING : Indicates that a call is coming.
ACTIVE : Indicates that the VoIP connection is launched.
CODEC The voice CODEC employed by present channel.
PeerID The present in-call or out-call peer ID (the format may be IP
or Domain).
The format is represented as seconds.
Connect Time
Tx Pkts Total number of transmitted voice packets during this
connection session.
Rx Pkts Total number of received voice packets during this
connection session.
Rx Loss Total number of lost packets during this connection session.
Rx Jitter The jitter of received voice packets.
In Calls The accumulating in-call times.
VoIP
to obtain appropriate Volume Gain.
tone).
remote user's answer.
11-13