Chevrolet Spark Owner's Manual page 60

3–14 INSTRUMENTS AND CONTROLS
To turn the head, tail and parking lamps
on or off, twist the end of the combina-
tion switch lever.
The light switch has three positions which
activate various lamp functions as follows:
• OFF: All the lights are off.
• : The parking lamps, tail lamps, li-
cense plate lamps, and instrument panel
lamps are illuminated.
• : The low-beam headlamps and all
of the above lamps are illuminated.
The headlamps will turn off automatically
when the ignition switch is turned to LOCK
or ACC.
TURN SIGNAL LEVER
RIGHT turn: Move the turn signal lever
up.
LEFT turn: Move the turn signal lever
down.
The turn signal will shut off automatically
and the lever will return to its normal po-
sition (specific angle dependent) after you
have completed the turn.
When changing lanes, move the turn sig-
nal lever part way and hold it there. When
you release the lever, it will return to its
normal position.
S3W1093A
An arrow on the Indicator and Warning
Lights Display will flash in the direction
of the turn or lane change.
If the arrows don't flash, check for
burned out indicator bulbs and check the
fuse.
These indicators are required for
safe driving.
Immediately replace any burned out
indicator bulbs.
Failure to keep the indicators in
proper working condition can cause
a collision resulting in personal
injuries and damage to the vehicle or
other property.
Shorter than usual flashes of the indica-
tor lights mean that exterior turn signal
bulbs may be burned out.
If a bulb is burned out, replace it to help
avoid an accident.
S3W1094A
CAUTION