Chevrolet Spark Owner's Manual page 53

Mode button pressed once again changes
the current Battery voltage and odometer
display to RPM & Trip display.
VOLT
H
F
SET
ODO KM
E C
Battery Voltage and Odometer Display
RPM
H
F
SET
TRIP KM
E C
RPM and Trip Display
Again pressing Mode button will change
to the initial Clock & Odometer display.
TRIPMETER SETTING
By pressing Mode button, Tripmeter will
be displayed .
Holding Set button for over 1 sec, the Trip
meter can be reset to zero.
MODE
S3W1058A
MODE
S3W1057A
INSTRUMENTS AND CONTROLS 3–7
DIGITAL CLOCK (Option)
When the ignition switch is turned to ON
position, the digital clock displays the
time.
Press Set button for 3 seconds. The clock
will start flashing indicating that it has
entered into "clock setting mode". By
pressing Set button within 1 second
again, hours indication flashes. By
pressing the Set button again minutes in-
dication flashes.
Hours and minutes displayed can be ad-
justed by pressing the Mode button for 1
second or more.
While adjusting hours, the AM & PM
automatically changes after every 12 hour
display.
While the number is flashing, if no button
is pressed for 5 seconds, current displayed
value is stored & display stops flashing
& it exits from clock setting mode.
Clock display start at 1:00 by default.