Chevrolet Spark Owner's Manual page 54

3–8 INSTRUMENTS AND CONTROLS
DIGITAL FUEL GAUGE
Indicates how much fuel remains in the
fuel tank when the ignition swich is turned
ON.
- 1 Bar, E & Fuel symbol flashing with 1
Hz (Slow flash or 1 flash per second) -
------- Fuel level 4.3L to 5.0L.
- 1 Bar, E & Fuel symbol flashing with 2
Hz (Fast flash or 2 flash per second) -
-------- Fuel less than 3.2L & will keep
blinking with 2 Hz till empty tank.
- E & Fuel symbol flashing with 2Hz at
empty tank.
After adding fuel and restarting the engine,
the fuel gauge changes to show the new
fuel level.
Movement of the fuel within the fuel tank
causes the fuel gauge to change when you
brake, accelerate or turn.
• Fuel tank capacity: 35 liters
RPM
F
SET
E
DIGITAL TEMPERATURE
GAUGE
Indicates engine coolant temperature
when the ignition switch is turned ON.
• When temperature is high all the 7
bars on temperature gauge will be
displayed and H & Temperature
symbol will be flashing.
• Do not continue to drive your vehicle
if the temperature gauge is in the hot
zone. This means your engine is
overheating.
H
TRIP KM
C
S3W1075A
CAUTION
RPM
H
F
MODE
TRIP KM
C
E
S3W1076A
INDICATORS AND WARNING
LAMPS
Your vehicle is equipped with a number
of warning lamps.
These warning lamps turn on when there
may be or there is a problem with one of
your vehicle's functions. Some warning
lamps come on briefly when you turn the
ignition key ON just to let you know they
are working properly.
Location of the warning lamps and indi-
cators is on the instrument panel.