Chevrolet Spark Owner's Manual page 149

TAILLIGHTS, STOPLAMPS, BACKUP
LAMPS AND REAR TURN SIGNALS
1. Open the rear hatch.
2. Remove two screws from the lamp
assembly.
3. Remove the lamp assembly.
4. Turn the bulb socket counterclockwise
to remove it.
5. Gently push in and turn the bulb
counterclockwise to remove it from the
socket.
6. Reverse the steps to install a new bulb.
CENTER HIGH-MOUNTED STOPLAMP
1. Open the rear hatch.
2. Remove two screws from the lamp as-
sembly.
3. Disconnect the wiring harness connec-
tor before removing the lamp housing.
4. Remove the lamp housing.
5. Remove the two screws and remove the
reflector assembly.
6. Pull the bulb straight out to remove it
from the socket.
7. Reverse the steps to install a new bulb.
S3W1196A
SERVICE AND VEHICLE CARE 7–33
SPORTY REAR SPOILER (Option)
High mount stop lamp is incorporated in
the rear spoiler at the rear and it glows
whenever service brake are applied. The
integrated rear spoiler enhances aerody-
namic performance, provides stable stance
in high speed driving.
S3W1197A