Brake Fluid - Chevrolet Spark Owner's Manual

BRAKE FLUID

Brake fluid can absorb moisture. Exces-
sive moisture in the fluid may reduce the
effectiveness of the hydraulic brake sys-
tem. Change the fluid according to this
manual to prevent hydraulic system cor-
rosion.
Use only recommended Brake fluid. Keep
reservoir filled to the proper level. Do not
allow the level to fall below MIN mark or
to raise beyond the MAX mark.
A low fluid level in the brake fluid reser-
voir can be either an indication of a leak
in the brake system or a normal indication
caused by usual brake pad/lining wear.
Consult your CHEVROLET retailer to de-
termine if the system needs repair and add
fluid after work is done on your hydraulic
brake system if it is required.
When your brake fluid drops to low level,
the brake system warning lamp (
come on.
ADDING BRAKE FLUID
1. Thoroughly wipe away dirt from around
the fluid reservoir cap.
CAUTION
• Make sure you thoroughly clean
around the brake fluid reservoir cap
before removing the cap.
Contamination of the brake fluid can
affect system performance, leading to
costly repairs.
) will
SERVICE AND VEHICLE CARE 7–11
2. Unscrew the filler cap.
3. Use the proper recommended brake
fluid to fill the reservoir to the MAX
mark. Be careful not to spill the fluid on
painted surfaces. If this happens, use
cold water to wash the affected area
immediately.
4. Reinstall the reservoir cap.
CAUTION
An overflow of brake fluid on the en-
gine may cause the fluid to burn.
• Do not overfill the reservoir.
An engine fire can cause personal in-
juries and damage your vehicle and
other property.
S3W1173A