Connecting Audio/Video Components - JVC RX-888VBK Instructions Manual

Connecting the rear and center speakers
Connect rear speakers to the REAR SPEAKERS terminals and a
center speaker to the CENTER SPEAKER terminals.
Center speaker
Left rear Right rear
speaker
speaker
Connecting the subwoofer speaker
You can enhance the bass by connecting a subwoofer.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs (not supplied).
Powered subwoofer

Connecting Audio/Video Components

You can connect the following audio/video components to this
receiver. Refer also to the manuals supplied with your components.
Audio Components
• Turntable
• CD player*
• Cassette deck
or MD recorder*
* You can connect these components using the methods described
in "Analog connections" (to the right) or in "Digital connections"
(see page 8).
CENTER REAR
SPEAKER SPEAKERS
+
–
RIGHT LEFT
SUBWOOFER
OUT
Video Components
• DVD player*
• TV
• DBS tuner*
• VCRs
• Video camera
Analog connections
Audio component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
+
through this receiver may be distorted.
–
Turntable
Turntable
Note:
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil type) must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.
CD player
CD player
To audio output
If an earth cable is provided for your
turntable, connect the cable to the
screw marked (H) on the rear panel.
To audio output
AUDIO
RIGHT LEFT
PHONO
CD
OUT
(REC)
TAPE
/MD
IN
(PLAY)
AUDIO
RIGHT LEFT
PHONO
CD
OUT
(REC)
TAPE
/MD
IN
(PLAY)