Av Compu Link Remote Control System - JVC RX-888VBK Instructions Manual

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1:
VCR 1
VHS
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
CONNECTIONS 2:
CASE1: If the components are equipped with the S-video
terminals
VIDEO
VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
CASE3: If only the VCR is equipped with the S-video
terminal
TV
VIDEO
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
To Video input 1
MONITOR
OUT
To Video input 2
DVD player
DVD
AV
COMPU LINK
AV
COMPU LINK
DO NOT use these video terminals.
DVD player
S-VIDEO
DVD
VCR
S-VHS
DO NOT use these video terminals.
VIDEO
DVD player
S-VIDEO
S-VHS
If the AV COMPU LINK terminal
on the TV is "RECEIVER/AMP"
RECEIVER/AMP
EX
(VCR)
If the AV COMPU LINK terminal
on the TV is "AV COMPU LINK
EX"
CASE2: If the components are not equipped with the S-
video terminals
DO NOT use these video terminals.
DVD player
VCR
VHS
CASE4: If only the DVD player is equipped with the S-video
terminal
DO NOT use these video terminals.
DVD player
DVD
VCR
VCR
VHS
TV
CAUTION:
The AV COMPU LINK remote
control system cannot control the
DBS tuner connected to the TV
SOUND/DBS jacks, and video
components connected to the
VIDEO and VCR 2 jacks on the
receiver.
AV
COMPU LINK
Notes:
RECEIVER/
AMP
• When connecting only the
VCR 1 or DVD player to this
receiver, connect it directly to
the receiver using cable with
the monaural mini-plugs.
• Refer also to the manual
supplied with your video
AV
COMPU LINK EX
components.
VIDEO
VIDEO
DVD
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
MONITOR
OUT
VIDEO
VIDEO
DVD
DVD
OUT
(REC)
VCR 1
IN
(PLAY)
MONITOR
OUT
TV
S-VIDEO
To Video input 2
TV
S-VIDEO
To Video input 2
To Video input 1