Operating Other Manufacturers' Video Equipment - JVC RX-888VBK Instructions Manual

This remote control supplied with the receiver can transmit control
signals for other manufacturers' VCRs, TVs, CATV converters and
DBS tuners. By changing the transmittable signals from preset ones
to the other manufacturers', you can operate the other
manufacturer's components using this remote control.
When operating the other manufacturers' components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer's code
each for VCR, TV, CATV converters, and DBS tuner.
STANDBY
TV/CATV/DBS
POWER POWER
DVD DVD MUILTI CD TAPE/MD
TV/DBS VIDEO PHONO
VCR 1 VCR 2 ANALOG/DIGITAL
SURROUND CNTR TONE CNTR
1 2
ON/OFF
MENU MENU
TEST REAR-L
SURROUND
4 5
MODE
ENTER ENTER
DISC
EFFECT REAR-R
7 8
/P
SOUND
SEA MODE SUBWOOFER
0
10
RETURN FM MODE/MUTING
MENU
CATV/DBS
SET
EXIT
DISPLAY
TV VOL CHANNEL VOLUME
TV/VIDEO VCR 1 TAPE
CONTROL
PLAY
/REW FF/
DOWN TUNING
REC STOP PAUSE
RM-SRX888J REMOTE CONTROL
ON
VCR 1
FM/AM
SLEEP
3
6
9
+10
100+
AUDIO/
TV/VCR
AUDIO/
TV/VCR
CATV/DBS
TEXT
Check to see if its remote
control mode selector is set
to the correct position.
To operate the audio
MUTING
system, TVs, and VCRs,
set it to "AUDIO/TV/VCR."
UP
To operate the CATV
converter and DBS tuner,
set it to "CATV/DBS."
To change the transmittable signals for
operating another manufacturer's TV
1. Set the remote control mode to "AUDIO/TV/
VCR."
2. Press and hold TV/CATV/DBS POWER.
3. Press TV/DBS.
4. Enter manufacturer's code (three digits) using
buttons 1 – 9, and 0.
See the list on pages 48 and 49 to find the code.
Examples: For a JVC product, press 0, 5, then 3.
For a Hitachi product, press 0, 5, then 6.
5. Release TV/CATV/DBS POWER.
The following buttons can be used for operating the TV (with
the remote control mode selector set to "AUDIO/TV/VCR"):
TV/CATV/DBS POWER:
Turns on and off the TV.
TV VOL +/–:
Adjusts the volume.
TV/VIDEO: Sets the input mode (either TV
or VIDEO).
After pressing TV/DBS (with the remote control mode selector
set to "AUDIO/TV/VCR"), you can perform the following
operations on a TV:
CHANNEL +/–:
1 – 10, 0, 100+ (+10): Selects the channels.
Note:
Refer to the manual supplied with your TV.
6. Try to operate your TV by pressing TV/CATV/
DBS POWER.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Changes the channels.
100+ (+10) button will function as
the ENTER button if your TV requires
pressing ENTER after selecting a
channel number.