Editing Discrimination Patterns 60 Method; Method - Minelab X-terra 305 Instruction Manual

60
editing disCrimination patterns – method 1
The detector's preset discrimination patterns
can be edited to create custom patterns.
Method 1 – to reject a specific target
ID using an actual target
In detection, a discrimination segment
will flash, indicating its position on the
discrimination scale and the target's ID number
will appear on the LCD.
Press Accept/Reject to reject that
target ID.
The discrimination segment and icon
will appear and the target ID number will
disappear to indicate the rejected ID.
Check that the target ID has been rejected
by detecting again. There should be no audio
response from that target ID.
editing disCrimination patterns – method 2
Method 2 – to reject a specific target
ID using + or –
In detection, use + and – to scroll through and
select the ID you want to modify. The flashing
segment and the target ID numbers will
indicate the selected ID.
Press Accept/Reject to either accept
or reject that ID. The discriminated segment
and the icon will appear (become shaded)
if rejected. The segment and the icon will
disappear if accepted.
Accept/Reject toggles between
accepting and rejecting targets.
The all metal pattern cannot be edited.
61