Inserting Batteries; Holding The Detector - Minelab X-terra 305 Instruction Manual

14

inserting batteries

The X-Terra uses 4 x AA batteries which
are not included with the detector.
Behaviour, p. 68)
Access the battery compartment via the
battery door located on the side of the
control box. Slide the battery compartment
door upwards with your thumb.
Place individual batteries into the
compartment as illustrated, ensuring the
positive (+) and negative (–) contacts match
the diagram on the control box.
Close the battery door by pushing and
sliding it downwards.
If the detector does not turn on check the
battery orientation.
The detector will not be damaged if the
batteries are inserted incorrectly.
(Battery

holding the deteCtor

Thread your arm through the armrest and
strap. Grasp the handle of the detector and
rest your forearm in the armrest.
Your elbow should sit just above the top of the
armrest. Lightly tighten the velcro strap and
secure it around your arm.
15