Discrimination Pattern; Edit A Discrimination Pattern; The Discrimination Pattern Editor - Minelab MANTICORE Instruction Manual

Discrimination Pattern

The Discrimination Pattern setting lets
you decide which Target IDs to detect or
ignore, so you can dig more treasure and
less trash�
Individual Target IDs can be Accepted or Rejected to create
a Discrimination Pattern� Upon detection, Rejected IDs
remain silent while Accepted IDs give a target response�
Discrimination Patterns are local — each Search Mode has
its own editable Custom Discrimination Pattern�
Discrimination
Pattern
Custom

THE DISCRIMINATION PATTERN EDITOR

The Discrimination Pattern Editor lets you Accept or Reject
Target IDs� The Target Trace remains live in the Editor so you
can see detected targets in real‑time� You can refer to it as
you adjust the Pattern to include/exclude specific targets�
The Ferrous Limits boundary is displayed for reference�
Rejected IDs Accepted IDs
(grey areas) (white areas)
Target ID 0–99
Currently
selected ID
CONTENTS
Discrimination Pattern in
the Settings Menu�
Ferrous Limits
boundaries
64
Selection Width Target Trace

EDIT A DISCRIMINATION PATTERN

1. Navigate to the Custom Pattern Editor:
Settings > Discrimination Pattern
2. Press / to select Custom, then press the Right
Soft Key ( Edit) to open the Custom Pattern Editor�
The Action Bar options will change to show the editing
functions, ( Accept) or (
3. To reject a group of IDs, press
start ID� Press /
5, 10, or 20) — this is the number of Target IDs selected
at the same time�
Press the Right Soft Key (
Rejected IDs will change to grey�
To accept a group of IDs, press
IDs� Press the Right Soft Key (
accepted IDs will now be white�
If your selection includes a combination of Accepted
and Rejected IDs, the Right Soft Key will default to
( Reject)� Press the Soft Key twice to Accept the
selection�
4. Continue Accepting or Rejecting Target IDs using the
Right Soft Key ( Accept/
created your final Discrimination Pattern�
52
Reject)�
to select the
/
to choose the Selection Width (1, 3,
Reject)� The group of
/ to select Rejected
Accept)� The group of
Reject) until you have