Advertisement

Instruction Manual

Advertisement

Table of Contents
loading

Summary of Contents for Minelab X-TERRA Series

  • Page 1 Instruction Manual...
  • Page 2: Table Of Contents

    Connecting the Control Box Disconnecting the Control Box Coil Cable Assembly Inserting Batteries 6 X‑TERRA 705 Keypad 7 X‑TERRA 705 LCD 8 X‑TERRA 305/505 Keypad 9 X‑TERRA 305/505 LCD 10 Specifications 10 X-TERRA Series Specification 11 X-TERRA Model Features 4901-0269-1...
  • Page 3: List Of Parts

    List of Parts Coil Skidplate (fitted to coil) Lower shaft Middle shaft Upper shaft Armrest Stand Control box Control box screw Rubber washers (× 2) Plastic wing nut Plastic bolt Armrest screw Armrest strap Velcro tabs (× 2) Warranty card Instruction manual...
  • Page 4: Assembly

    Assembly Connecting the Coil Insert the two rubber washers into the lower shaft yoke. Slide the yoke into the yoke bracket on top of the coil. Insert the plastic bolt through the yoke and the yoke bracket. Fasten with the plastic wing-nut, being careful not to damage the thread of the bolt by over-tightening.
  • Page 5: Armrest Assembly

    Assembly Armrest Assembly Place the armrest onto the top of the upper shaft. Insert the screw through the stand, upper shaft and armrest, then tighten the screw. Thread the armrest strap through both slots in the armrest. The X-TERRA is designed to be used in either the left or right hand.
  • Page 6: Coil Cable Assembly

    Coil Cable Assembly Wind the coil cable around the lower and middle shaft enough times to take up the slack. Use the velcro tabs to hold the coil cable in place against the shaft. Align the coil plug and push it into the socket in the back of the control box, firmly tightening the retaining ring to hold it in place.
  • Page 7: Terra 705 Keypad

    X‑TERRA 705 Keypad LCD Display Area Pinpoint/Detect: This button has two functions. Power Pinpoint assists in locating the exact Patterns: Scrolls through the Discrimination position of a target prior to recovery. Patterns (Coin & Treasure Mode only). Detect exits menu settings and returns to detection.
  • Page 8: Terra 705 Lcd

    X‑TERRA 705 LCD Shallow Deep target target All Metal (AM): Indicates that the All Metal Menu Scale: Provides a visual indication of the Pattern has been selected. value of the selected setting adjustment. The Menu Scale also works with Pinpoint to indicate Patterns: Preset Discrimination Patterns that how close the coil is to the target.
  • Page 9: Terra 305/505 Keypad

    X‑TERRA 305/505 Keypad LCD Display Area Plus: Adjusts settings, and scrolls to the right Power through the discrimination segments. Patterns: Scrolls through the Discrimination Accept/Reject: Accepts or rejects certain metals Patterns. by turning on/off individual discrimination segments. X-TERRA 305 X-TERRA 505 Ground Balance: Activates the Ground Balance (2 patterns) (3 patterns)
  • Page 10: Terra 305/505 Lcd

    X‑TERRA 305/505 LCD Shallow Deep target target All Metal (AM): Indicates that the All Metal Menu: Adjustable settings that can be Pattern has been selected. customised for personal preferences. Patterns: Preset Discrimination Patterns that suit Sensitivity Threshold different search preferences. Ground Balance Volume Noise Cancel...
  • Page 11: Specifications

    Specifications X‑TERRA Series Specification Transmission Single Frequency Sine Wave Technology VFLEX Coil Standard 9" Concentric 7.5kHz (waterproof ) Audio Internal Speaker and Headphone Output Search Mode Motion Detector Batteries (not included) 4 × AA Alkaline/Carbon/Lithium or NiMH/NiCad Length Extended: 56" (1420 mm) Collapsed: 48" (1220 mm) Weight (Excluding Batteries) 2.9lbs (1.3kg) Optional Accessories...
  • Page 12 Low Battery Audio Alarm User Interface Buttons 8 + Power 8 + Power 11 + Power LCD Segments Monochrome positive Monochrome positive Monochrome Visual Display reflective LCD reflective LCD transflective LCD LCD backlight Minelab reserves the right to make changes without notice.
  • Page 13 Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed The Minelab metal detector discussed in this to provide reasonable protection against harmful instruction manual has been expressly designed interference in a residential installation.
  • Page 14 Australia & Asia Pacific minelab@minelab.com.au Europe & Russia minelab@minelab.ie North, South & Central America minelab@minelab.com Middle East & Africa minelab@minelab.ae Minelab Do Brazil minelabdobrazil@minelab.com...

This manual is also suitable for:

X-terra 305X-terra 505X-terra 705

Table of Contents