Example Detections - Minelab X-terra 305 Instruction Manual

24

example deteCtions

Discrimination Pattern
The factory preset pattern 1 rejects ferrous
metals and foil, and accepts nonferrous metals.
Patterns can be edited and saved according to
detecting preferences.
Audio
A detected nonferrous target will give a
medium – high tone audio response.
Visual
A detected nonferrous target will give a visual
indication within the nonferrous section of the
discrimination scale and a positive target ID.
A detected target ID segment (indicated
on the diagram by a grey icon) will flash (if
accepted) quickly 3 times to show its position
on the discrimination scale — just like a cursor
on a computer screen. The segment will
continue to flash slowly until another target ID
segment is detected.
Medium
High
4 icons to
indicate the
targets depth
from the coil,
approx. 6-8"
(15-20cm)
Nonferrous coin
All Metal Pattern
The all metal pattern turns off every
discrimination segment, allowing all metals
including ferrous targets to be detected.
Audio
A detected ferrous target will give a low tone
audio response.
Visual
A detected ferrous target will give a visual
indication within the ferrous section of the
discrimination scale and a negative target ID.
Further understanding of detector basics and
detailed detector operation may be obtained
from the rest of this manual.
Low
1 icon to indicate
the targets depth
from the coil,
approx. 0-2" (0-
Ferrous nail 5cm)
25