After Servicing The Machine; Lithium Batteries (Mf Models) - Ricoh M199 Service Manual
Ricoh printers service manual
Hide thumbs
Also See for M199:
- Field service manual (218 pages) ,
- Technical training manual (141 pages)
Table of Contents
Advertisement
Before You Start
3.1.3 AFTER SERVICING THE MACHINE
1.
Make sure all parts that require grounding are properly grounded.
2.
Make sure the interlock switch is functioning.
3.
Do not leave unused solder or parts inside the machine.
4.
Do not leave any tools inside the machine.
5.
Make sure all wires are properly connected and routed.
6.
Make sure wires are not jammed between parts of the machine.
3.1.4 LITHIUM BATTERIES (MF MODELS)
Incorrect replacement of lithium battery(s) on the controller or on the fax unit poses risk of
explosion. Replace only with the same type or with an equivalent type recommended by
the manufacturer. Discard used batteries in accordance with the manufacturer's
instructions.
M199/M200/M203/M204
3-4
SM
Advertisement
Chapters
Table of Contents
