Specifications For 7014 Series Model T00 And Model T42 System Rack Racks; Dimensions; Weight; Installation Airflow - IBM T00 Service Manual

Specifications for 7014 Series Model T00 and Model T42 System Rack
Racks
This section contains specifications for the 7014 Series Model T00 and Model T42 System Rack racks.

Dimensions

v T00 Height: 1804 mm (71 in)
v T00 Height with power distribution panel: 1926 mm (75.8 in)
v T42 Height: 2015 mm (79.3 in)
v Depth:
– T00 and T42 with Rear Door only: 1042 mm (41 in)
– T00 with Rear and Front Door: 1098 mm (43.3 in) - Feature 6097 and Feature 6068
– T00 with Rear and Front Door: 1147 mm (45.2 in) - Feature 6088
– T42 with Rear and Front Door: 1098 mm (43.3 in) - Feature 6083
– T42 with Rear and Front Door: 1147 mm (45.2 in) - Feature 6089 and Feature 6069
v Width:
– T00 and T42 without side panels: 623 mm (24.5 in)
– T00 and T42 with side panels: 644 mm (25.4 in)
v T00 EIA units: 36 EIA units
v T42 EIA units: 42 EIA units

Weight

v T00 Base Empty Rack: 244 kg (535 pounds)
v T00 Full Rack: 816 kg (1795 pounds)
v T42 Base Empty Rack: 261 kg (575 pounds)
v T42 Full Rack: 930 kg (2045 pounds)

Installation Airflow

Rack airflow requirements are a function of the number and type of drawers installed. All rack installations
require careful site and facilities planning designed to address the cumulative drawer heat output and
provide the airflow volume rates necessary to comply with drawer temperature requirements. Refer to the
individual drawer specifications.

Power Requirements

In the U.S., each power distribution bus installed in a rack requires a dedicated power line of 200 to 240 V
ac, 30 A.
In other countries, input power to each power distribution bus may vary depending upon country
requirements.
Chapter 1. Reference Information
13