Racks And Rack Features; 7014-T00 And 7014-T42 Racks; Installing The 7014-T00 And 7014-T42 Racks - IBM 7014-T00 Manual

Power systems. racks and rack features
Hide thumbs Also See for 7014-T00:
Table of Contents

Advertisement

Racks and rack features

Learn about the procedures used to install racks and rack features.
You can perform these tasks or contact a service provider to perform the tasks for you. You might be
charged a fee by the service provider for this service.

7014-T00 and 7014-T42 racks

Use this information to install the 7014-T00 and 7014-T42 racks and to install the related components of
the racks system.

Installing the 7014-T00 and 7014-T42 racks

Use this information to install the 7014-T00 and 7014-T42 racks.
About this task
If you are installing a rack security kit in this rack, see "Installing the rack security kit" on page 79 after
you have installed the rack.
Before installing a rack, read the "Rack safety notices" on page 1.
Completing a parts inventory
Before beginning the rack installation, perform a parts inventory.
About this task
If you have not done so, complete a parts inventory before installing the unit in the rack:
Procedure
1. Locate the kitting report in an accessory box.
2. Ensure that you received all of the features that you ordered and all of the parts on the kitting report.
Results
If there are incorrect, missing, or damaged parts, contact:
• Your IBM reseller
• IBM support (see the Directory of worldwide contacts website (http://www.ibm.com/planetwide) at IBM
Directory of worldwide contacts - Country/region for contact information for your country
• IBM Rochester Manufacturing Automated Information Line at 1–800–300–8751 (United States only)
Rack safety notices
You need to read the rack safety notices before installing equipment.
About this task
Before installing a rack, rack features, or a system or expansion unit into a rack, read the following safety
information.
Attention: If you are installing equipment into a non-IBM rack, the rack must comply with the
Electronics Industries Association (EIA) 310D specifications. If you do not have a rail kit designed
for the equipment in the non-IBM rack, do not install the equipment into the rack as damage to the
equipment or personal injury could occur.
(R001 part 1 of 2):
©
Copyright IBM Corp. 2018, 2019
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

7014-t42

Table of Contents