Safety Notices; Electrical Safety - IBM T00 Service Manual

Safety Notices

A danger notice indicates the presence of a hazard that has the potential of causing death or serious
personal injury.
v v
v 17
v 21
v 25
A caution notice indicates the presence of a hazard that has the potential of causing moderate or minor
personal injury.
v v
v 15
v 17
v 18
v 25
v 26
v 27
v 29
v 31
v 36

Electrical Safety

Observe the following safety instructions any time you are connecting or disconnecting devices attached to
the workstation.
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage on metal parts of
the system or the devices that attach to the system. It is the responsibility of the customer to
ensure that the outlet is correctly wired and grounded to prevent an electrical shock.
Before installing or removing signal cables, ensure that the power cables for the system unit
and all attached devices are unplugged.
When adding or removing any additional devices to or from the system, ensure that the power
cables for those devices are unplugged before the signal cables are connected. If possible,
disconnect all power cables from the existing system before you add a device.
Use one hand, when possible, to connect or disconnect signal cables to prevent a possible
shock from touching two surfaces with different electrical potentials.
During an electrical storm, do not connect cables for display stations, printers, telephones, or
station protectors for communications lines.
D05
CAUTION:
This product is equipped with a three-wire power cable and plug for the user's safety. Use this
power cable with a properly grounded electrical outlet to avoid electrical shock.
C01
v