Setting The Clock - JVC EX-A3 Instructions Manual

Basic operations (continued)

Setting the clock

You can set the clock when the main unit is on or
off.
Example: To set the clock to 10:30 a.m. on
Wednesday
1
Press [CLOCK/TIMER].
2
Press 2 or 3 to select the hour.
• Hold down 2 or 3 to incrementally increase
the hour setting.
• You can also use the number buttons to
specify the hour.
3
Press [ENTER].
4
Press 2 or 3 to select the minute.
• Hold down 2 or 3 to incrementally
increase the minute setting.
• You can also use the number buttons to
specify the minute.
5
Press [ENTER].
15
6
Press 2 or 3 to select the day of
the week.
• Hold down 2 or 3 to change the setting for
the day of the week.
• Abbreviations are used for the days of the
week.
SUN→Sunday
MON→Monday
TUE→Tuesday
WED→Wednesday
THU→Thursday
FRI→Friday
SAT→Saturday
7
Press [ENTER].
• The clock starts from 0 seconds in the
minute you set.
NOTE
• While setting the clock, you can return to the
previous step by pressing [CANCEL].
• The time display on the main unit is a 12-hour
clock.
• The clock gains or loses approximately 1 minute
per month.
• If the power cable of the main unit is discon-
nected from the AC outlet or the power is inter-
rupted, the clock setting is stored for
approximately 1 minute.
Adjusting the clock
Press [CLOCK/TIMER] repeatedly to
display the clock, and then adjust the
clock starting from step 2.
Displaying the clock when using this
system
Press [DISPLAY].
• Refer to "Changing the display in the display
window". (Refer to page 26.)