Table of Contents
Advertisement
Basic operations (continued)
Auto standby function
If no sound is produced for 3 minutes, the main
unit automatically turns off.
This function is available when a loaded disc, a
connected USB mass storage class device, or a
device connected to the [LINE1 IN] terminal is
selected as the source.
You cannot use this function when a radio
broadcast or a device connected to the [LINE 2 IN]
terminals or [LINE 3 DIGITAL IN] terminal is
selected as the source.
Activating the auto standby function
■When a loaded disc, a connected USB
mass storage class device, or a device
connected to the [LINE1 IN] terminal is
selected as the source
Press [A.STANDBY].
.
• Pressing [A.STANDBY] once again deactivates
the function. (The display window changes to
"A STBY CANCEL".)
17
"A. STBY" indicator
Performance of the auto standby
function
When playback of a loaded disc, a connected USB
mass storage class device, or a device connected
to the [LINE1 IN] terminal finishes, the auto
standby function starts a countdown.
At this time, the "A.STBY" indicator starts
flashing.
20 seconds before the main unit turns off,
"AUTO STANDBY" starts flashing.
When no operation is carried out for 3 minutes, the
main unit automatically turns off.
Hide quick links:
Advertisement
Table of Contents
