Avaya Wireless USB Client Getting Started Manual page 67

NOTE:
Although the MS-Windows 2000 USB Client Properties window
includes a special "update" button, it is not guaranteed that this
button will truly update all driver files. Therefore Avaya advises you
to remove and re-install the driver.
Remove Existing USB Client Drivers
1. Make sure your USB Client is inserted in the USB Client connector of
your computer.
2. On your Windows desktop, right-click the
choose
Properties
3. In the Network and Dial-up Connections window, right-click the
Area Connection
4. Next click the
window.
5. Select the
USB Client drivers.
6. Finally disconnect the USB Client from its connector and proceed with
the instructions as described under "Install Drivers" on page 2-5.
Figure B-5
Troubleshooting - Windows 2000 Troubleshooting Tips
from the pop-up menu.
icon and select
button to view the USB Client Properties
Configure
tab and click the
Driver
Remove USB Client Drivers
Avaya Wireless USB Client - Getting Started Guide
My Network Places
from the pop-up menu.
Properties
button to finish removing the
Uninstall
icon and
Local
B-17