Avaya Wireless USB Client Getting Started Manual page 55

Can Not Connect To The Network
If your USB Client seems to be working fine, but you are not able to connect
to the network, this error might be due to a configuration mismatch.
For example if both LEDs of your USB Client blink once every ten seconds,
the problem is likely to be caused by a configuration mismatch of:
Network Name (this value is case-sensitive)
Encryption Key
Other causes may be:
No driver loaded.
Station not authorized to access network.
USB Client defect.
LEDs Work But Can Not Connect to
Network
If you can not connect to the network while the LEDs indicate that the
network is working properly (Power LED is on, Transmit Receive LED blinks)
probably the TCP/IP settings of your network are not properly set.
Changing TCP/IP Settings
Consult your LAN Administrator for your the values of your TCP/IP settings.
Troubleshooting - Common Troubleshooting Tips
Avaya Wireless USB Client - Getting Started Guide B-5