Avaya Wireless USB Client Getting Started Manual page 57

Peer-to-Peer networks are also not likely to have a DHCP server already set
up on the network.
Configure TCP/IP Settings for Static IP Addressing
NOTE:
This IP configuration should only be applied to wireless networks
that do not have a DHCP server installed.
1. Right-click
Network Neighborhood
2. Select
Properties
dialog box.
Properties
3. Select the
Configuration
.
Card
4. Click
Properties
Make sure the
NOTE:
In accordance with private IP addressing you can use IP addresses
from
192.168.0.1
255.255.255.0
Each computer on the network must have a unique IP address.
It is best to assign the value
192.168.0.2
All computers on the network must use the same Subnet Mask
value
5. Click to return to the
OK
Troubleshooting - Common Troubleshooting Tips
from the pop-up menu to display the
tab, and click
to display the
TCP/IP Properties
Specify an IP address
to
192.168.0.254
.
to the next computer and so on.
.
255.255.255.0
Network Properties
Avaya Wireless USB Client - Getting Started Guide
on your desktop.
TCP/IP Avaya Wireless USB
dialog box.
option is selected.
with the Subnet Mask of
. to the first computer,
192.168.0.1
dialog box.
Network
B-7