Avaya Wireless USB Client Getting Started Manual page 24

Install your USB Client - Wireless LAN Properties
Network Name
The Network Name is a case-sensitive string of alphanumeric characters in
the range of "a" to "z", "A" to "Z" and "0" to "9". It connects you to the wireless
LAN, like a cable would connect a wired computer to an Ethernet LAN.
Valid values are subject to the type of network to which you wish to connect
your computer:
To connect to a Residential Gateway-I, enter the 6-digit Network Name
that is printed on a label at the bottom of the Residential Gateway-I
device.
To connect to a Peer-to-Peer workgroup, enter the name as agreed upon
by the workgroup participants.
If you wish to start a workgroup yourself, enter a name with a maximum
of 32 alphanumeric characters, and share that value with your workgroup
participants.
This value should have a maximum of 32 alphanumeric. characters.
Alternatively you may choose to enter the value "ANY" (all character
upper-case) to connect to any IEEE 802.11 compliant wireless network
in the vicinity of your computer.
Proceed with the Encryption Key settings, or click
to the Add/Edit Configuration Profile window.
2-12 Avaya Wireless USB Client - Getting Started Guide
to confirm and return
OK