Avaya Wireless USB Client Getting Started Manual page 56

Troubleshooting - Common Troubleshooting Tips
To change the TCP/IP Settings:
1. On the Windows task bar click the
2. Select
3. On the Control Panel window, double-click on the
the
Network Properties
If this protocol is not yet installed, click the
TCP/IP
information.
If this protocol is installed, select this protocol and click the
Properties
provided by your LAN Administrator. Make changes if necessary,
and click
4. When prompted, restart your computer.
Static IP Addressing for Peer-to-Peer networks
In networks with Static IP addressing, the network administrator manually
assigns an IP address to each computer. Once a Static IP address is
assigned, a computer uses the same IP address every time it reboots and
logs on to the network, unless you manually change the IP address in the
Network Properties
to set up and do not require additional network management software.
A Peer-to-Peer network environment is best suited for
because of its simplicity.
B-6
and then select
Settings
.
protocol from the list. Refer to the Windows Help for more
button. Check if the parameters resemble the settings
when you are done.
OK
dialog box. Networks using Static IP addresses are easy
Avaya Wireless USB Client - Getting Started Guide
button.
Start
.
Control Panel
Add
icon to view
Network
button and select the
Static IP addressing
,