Audio; Others - JVC CA-UXGN7V Instructions Manual

Changing the initial settings with the preference screen (continued)

AUDIO

? ?
Items
DIGITAL Select the output signal type suitable to
AUDIO the device connected to the [OPTICAL
OUTPUT DIGITAL OUTPUT] terminal. Refer to
"List of relationships of DIGITAL AUDIO
OUTPUT preference items and output
signals" on page 36.
PCM ONLY :
Device corresponding only to linear PCM
DOLBY DIGITAL/PCM :
Dolby Digital decoder or device having
the same function
STREAM/PCM :
Do not select this item. This item is not
used for this system.
DOWN MIX Select the signal suitable to the device
connected to the [OPTICAL DIGITAL
OUTPUT] terminal. Set "DOWN MIX"
only when "DIGITAL AUDIO OUTPUT" is
set to "PCM ONLY".
DOLBY SURROUND :
Dolby Pro Logic decoder-built-in device
STEREO :
Ordinary audio device
D (Dynamic). To correct the difference between high
RANGE volume and low volume when playing
COMPRESSION back with low volume (only for a DVD
recorded with Dolby Digital).
AUTO :
The D. RANGE COMPRESSION function
automatically turns on.
ON :
The D. RANGE COMPRESSION function
is always on.
35
Contents

OTHERS

? ?
Items
RESUME Select ON or OFF. (Refer to page 22.)
ON Select ON or OFF. (Refer to page 20.)
SCREEN
GUIDE
DivX The main unit has its own registration
REGISTRATION code. You can confirm the registration
code, when necessary. Once you have
played back a disc/file on which the regis-
tration code is recorded, the registration
code of the main unit is overwritten for
copyright protection.
Contents