Using The Remote Control; Inserting The Batteries Into The Remote Control; Operating The System From The Remote Control; Operating A Tv Manufactured By Jvc Using The Remote Control - JVC CA-UXGN7V Instructions Manual

Using the remote control

The numbers refer to the pages in which the parts
are explained.
5
Inserting the batteries into
the remote control
Insert the batteries into the remote control by
matching the polarity (+ and −) correctly.
R03 (UM-4)/AAA
(24F) type dry-cell
batteries (supplied)
• If the range or effectiveness of the remote con-
trol decreases, replace both batteries.
Operating the system from
the remote control
Point the remote control directly at the
front of the main unit.
• Do not block the remote control sensor on the
main unit.
Operating a TV
manufactured by JVC using
the remote control
You can use the remote control of this system to
operate a TV manufactured by JVC.
Remote control
button
[AUDIO/TV ]
F
+ [SHIFT]*
[TV/VIDEO]
[ TV CH]/[TV CH+]
–
+ [SHIFT]*
[VOLUME ]/
[VOLUME ]
[SHIFT]*
+
* Make sure to hold down [SHIFT] when you press
the desired function button.
Usage
Turns on/off the TV.
Changes between the
TV and video input.
Changes channels.
Adjusts volume.