Listening To The Radio; Playing Back A Disc - JVC CA-UXG30 Instructions Manual

Listening to the Radio

To select the band (FM or AM)
Remote control: Main unit:
To tune in to a station
While FM or AM is selected...
Remote control:
2 sec.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press 4 or ¢.
If the FM station has poor reception
The MONO indicator lights on the display.
FM MODE/
PLAY MODE
Reception will improve though stereo effect
is lost—Monaural reception mode.
To restore the stereo effect, press the button
again (the MONO indicator disappears).
To preset the stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected (see the previous column).
2
Activate the preset number entry mode.
SET
S.TURBO
QP Link
• Finish the following process while the indication on the
display is flashing.
FM AM
FM/AM
Main unit:
2 sec.
DOWN UP
Remote
ONLY
Remote
ONLY
3
Select a preset number for the station you store.
PRESET/GROUP/PTY
DOWN UP
Increases the
preset numbers.
Decreases the
preset numbers.
FM
S.TURBO
QP Link
To tune in to a preset station
After selecting the band, select the preset number for the
preset station.
PRESET/GROUP/PTY
DOWN UP
Increases the preset numbers.
Decreases the preset numbers.

Playing Back a Disc

This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
To insert a disc
You can insert a disc while playing another source.
To close the disc tray, press 0 again.
• If you press CD 6, disc tray closes automatically and
playback starts.
To start: To pause:
To release, press again.
SET
FM
S.TURBO
QP Link
Remote
ONLY
To stop:
PTY SEARCH
8