Advanced Radio Operations
Remote control
DISPLAY
MODE
Receiving FM Stations with Radio Data
System
Remote
ONLY
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
PS (Program
Shows commonly known station
Service)
names.
PTY (Program
Shows types of broadcast programs.
Type)
RT (Radio Text)
Shows text messages the station
sends.
Enhanced Other
Provides the information about the
Networks
types of the programs broadcast by
the Radio Data System stations of
the different networks.
To show the Radio Data System information
While listening to an FM station...
DISPLAY
MODE
Clock
(Non Radio Data System signal)
PS
Station names are displayed. "NO PS" will
appear if no signal is sent.
PTY
The broadcast program type is displayed.
"NO PTY" will appear if no signal is sent.
RT
Text messages the station sends are displayed.
"NO RT" will appear if no signal is sent.
PTY SEARCH
7
PRESET/GROUP/PTY
DOWN,UP
REPEAT/
TA/News/Info
PS
PTY
RT
Frequency
Searching for a Program by PTY Codes
You can locate a particular kind of program from the preset
channels (see page 8) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to an FM station...
PTY SEARCH
S.TURBO
QP Link
S.TURBO
QP Link
2
Select a PTY code.
PRESET/GROUP/PTY
• For details about each PTY code,
DOWN
UP
3
Start searching.
PTY SEARCH
S.TURBO
QP Link
S.TURBO
QP Link
Ex. When "NEWS" is selected
The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, "NOTFOUND" appears on the
display.
• To stop searching any time during search, press
PTY SEARCH.
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing...
PTY SEARCH
Remote
ONLY
FM
ST
FM
ST
see page 13.
FM
ST
FM
ST
12