Usb Cable; Usb Host - Olivetti PG L2140 Operation Manual

Sleep Timer (Sleep timer timeout time)
You can adjust the length of time the printer waits before entering Auto Sleep in the absence of data. The printer reverts to
normal operation mode when the printer receives a print job, [OK] is pressed or one of the exterior covers is opened. The
default time is 1 minute.
Power Off Rule (Power Off Rule setting)
The Power Off Rule is used to stop the power from automatically turning off when the machine is in certain states or certain
settings are in effect. Rules that can be set and their initial settings are as follows:
Item
Network (Network interface setting)
USB Cable (USB interface setting)
USB Host (USB memory slot setting)
RAM Disk (RAM Disk Mode setting)
NIC (Option Network interface kit (NIC) setting)
Parallel I/F (Parallel interface setting)
Note When On is set it automatically turns off.
Network is only displayed on network compatible models.
NIC is only displayed when the optional wireless network interface kit (IB-51) has b e en
installed.
Parallel I/F is only displayed when the optional parallel interface kit (IB-32) has been installed.
Power Off Rule:
Network
1
********************-

USB Cable

2

USB Host

3
1
2
3
4
Default Value
PG L2140/PG L2145/ PG L2150
For EU countries
1
2
a b
[ Exit ]
In the Timer Setting menu, press  or  to select Sleep Timer.
Press [OK]. The Sleep Timer screen appears.
Use the numeric keys or  or  to set the sleep time.
Press [OK]. The sleep time setting is stored and the Timer
Setting menu reappears.
Other than EU
†
countries
O
O
O
O
O
O
In the Timer Setting menu, press  or  to select Power Off
Rule.
Press [OK]. The Power Off Rule menu screen appears.
4-90
Operation Panel
O
O
O
O
O
O