Setting The Paper Thickness - Olivetti PG L2140 Operation Manual

• Custom Paper Settings...4-36

Setting the Paper Thickness

You can set the paper thickness by selecting a paper weight.
The available paper weights are as follows:
• Extra Heavy
• Heavy 3
• Heavy 2
• Heavy 1
• Normal 3
• Normal 2
• Normal 1
• Light
The default setting is Normal 2 for plain paper. When using any paper other than plain p aper, you should change the paper
weight referring to the table below to achieve the best possible print quality for each paper.
Note Depending on the type of paper, the toner may not adhere to the paper properly. To solve this problem, select
the half speed mode from the printer driver. For more information, refer to Half Speed Mode (Printer Driver
Settings) on page 3-6.
Media Type
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Use the procedure below to set the paper weight.
(For the procedure for setting weights for custom paper (CUSTOM 1 to 8), refer to Custom Paper Settings on page 4-36.)
Media Type Set.: a b
Plain
1 ********************-
Transparency
2
Preprinted
3
Paper Weight
Normal 2
Extra Heavy
Normal 2
Heavy 1
Normal 3
Normal 2
Light
Normal 3
1
2
[ Exit ]
3
Media Type
Letterhead
Color
Prepunched
Envelope
Cardstock
Thick
HighQuality
CUSTOM 1 to 8
In the Paper Settings menu, press  or  to select Media Type
Set..
Press [OK]. The Media Type Set. screen appears listing the
media types that can used with the printer.
Press  or  to select the media type for which you want to set the
paper weight.
4-35
Operation Panel
Paper Weight
Normal 3
Normal 3
Normal 2
Heavy 3
Heavy 3
Heavy 3
Normal 2
Normal 2