Buzzer (Alarm (Buzzer) Setting) - Olivetti PG L2140 Operation Manual

Buzzer (Alarm (Buzzer) setting)

This function uses tones to notify the user of printer operations and the printer status. This setting is useful, for example,
when the printer is located some distance from the user.
The options available in Buzzer are as follows:
• Key Confirmation (Key confirmation tone setting)...4-79
• Job Finish (Job completed tone setting)...4-79
• Ready (Preparation completed tone setting)...4-80
• Error (Error tone setting)...4-80
• Keyboard Confirm (Keyboard confirmation tone setting)...4-80
Buzzer:
Key Confirmation
1 ********************-
Job Finish
2
Ready
3
Key Confirmation (Key confirmation tone setting)
When On is selected in this setting, a tone sounds each time a key is used. The default setting is On.
Key Confirmation: a b
Off
1
2 *On
********************-
Job Finish (Job completed tone setting)
When On is selected in this setting, a tone sounds when printing ends. The default setting is Off.
Job Finish:
1 *Off
********************-
On
2
1
2
a b
[ Exit ]
1
2
3
4
1
2
a b
3
In the Device Common menu, press  or  to select Buzzer.
Press [OK]. The Buzzer screen appears.
In the Buzzer menu screen, press  or  to select Key
Confirmation.
Press [OK]. The Key Confirmation screen appears.
Press  or  to select whether the key confirmation tone is enabled.
Press [OK]. The key confirmation tone setting is set and the Buzzer
menu reappears.
In the Buzzer menu screen, press  or  to select Job Finish.
Press [OK]. The Job Finish screen appears.
Press  or  to select whether the printing completed tone is
enabled.
4-79
Operation Panel