Erasing All Albums-All Erase; Erasing All Albums (All Erase); Copying A Track-Copy Track; Copying A Track (Copy Track) - JVC CA-NXHD10R Instructions Manual

Erasing All Albums—ALL ERASE

All data in the HDD will be erased.

On the remote control ONLY:
1
Press TITLE/EDIT repeatedly until "ALBUM EDIT?"
appears in the main display, then press SET.
• The source changes to "HDD" automatically if
another source has been selected.
2
Press SELECT ¢ or SELECT 4 to select "ALL
ERASE?," then press SET.
The confirmation screen appears in the main display.
3
Press ENTER.
The following warning screen appears in the main
display.
4
Press SET.
The reconfirmation screen appears in the main display.
5
Press ENTER again.
The HDD lamp flashes in red and "HDD WRITING"
appears while the editing you have made is being
stored in the HDD.
• If you have performed the above procedure during
play, HDD playback stops.
Copying a Track—COPY TRACK
You can make a duplication of a track in the same album or
in a different album. A newly duplicated track will become
the last track in an album where you copy the track into.
On the remote control ONLY:
If the HDD includes many albums and tracks, select the
album and track using Search Mode (see page 38) before
performing the procedure below.
1
Press TITLE/EDIT repeatedly until "TRACK EDIT?"
appears in the main display.
• The source changes to "HDD" automatically if
another source has been selected.
• Each time you press TITLE/EDIT, Title/Edit Modes
change as follows:
TITLE?
Canceled
2
Press SET.
3
Press SET again.
The currently selected track of the current album flashes.
4
Select a track you want to copy.
1) Press ALBUM + or ALBUM – to select the album.
2) Press SELECT ¢ or SELECT 4 to select the
track.
• You can select the track directly using the number
buttons. In this case, the selected track starts
playback repeatedly.
Ex. When selecting Album 5, then Track 9
– 61 –
LIB. EDIT? ALBUM EDIT?
(Library edit)
TRACK EDIT?