Dividing A Track-Divide; Dividing A Track (Divide); This Function Separates A Track Into Two Tracks; The Subsequent Tracks Are Automatically Renumbered - JVC CA-NXHD10R Instructions Manual

3
Select a track you want to move from.
1) Press ALBUM + or ALBUM – to select an album.
2) Press SELECT ¢ or SELECT 4 to select a
track.
• You can select the track directly using the number
buttons. In this case, the selected track starts
playback repeatedly.
3) Press SET.
Ex. When moving Track 5 from Album 5
4
Select the position (track number) you want to move
to.
1) Press ALBUM + or ALBUM – to select an album.
2) Press SELECT ¢ or SELECT 4 to select the
position (track number).
• To move the track as the last track in the selected
album, select "END."
• You can select the track directly using the number
buttons. In this case, the selected track starts
playback repeatedly.
3) Press SET.
Ex. When moving into Album 9 as the last track
5
Press ENTER.
The HDD lamp flashes in red.
"PLEASE WAIT" appears while the editing you have
made is being stored in the HDD.
• If you have performed the above procedure during
play, HDD playback stops.
If "CANNOT ENTRY LIB." appears in the main
display
You have selected the album in "Library TUNER," or you have
selected an album including 254 tracks (fully recorded album) in
step 4 .
You cannot move a track into such albums.
Dividing a Track—DIVIDE
This function separate a track into two tracks.

The subsequent tracks are automatically renumbered.

• When the original track has a title, two separate tracks
are reassigned the same title as the original track.
• You cannot set a dividing point within the first 4 seconds
and the last 3 seconds of a track.
1st
A
After dividing
track 1
1st
A1
Ex. When dividing Track 1 (Song A)
On the remote control ONLY:
If the HDD includes many albums and tracks, select the
album and track using Search Mode (see page 38) before
performing the procedure below.
1
Press TITLE/EDIT repeatedly until "TRACK EDIT?"
appears in the main display, then press SET.
• The source changes to "HDD" automatically if
another source has been selected.
2
Press SELECT ¢ or SELECT 4 to select
"DIVIDE?," then press SET.
The currently selected track starts playing.
Within the first 4 seconds, this will not be shown.
3
If necessary, select a track.
1) Press ALBUM + or ALBUM – to select an album.
2) Press SELECT ¢ or SELECT 4 to select a
track.
• You can select the track directly using the number
buttons.
By holding SELECT ¢ or SELECT 4, you can
fast-forward or fast-reverse the track to find the
dividing point.
– 64 –
Continued
2nd 3rd 4th
B C D
2nd
3rd 4th 5th
A2 B C D
Track No.