All Erase Function; Erasing A Portion Of A Track - JVC CA-MD70 Instructions Manual

Continued
Amplifier/tuner
MD recorder
MD IN lamp

ALL ERASE Function

This function allows you to erase all the tracks on an MD.
• To do the following procedures, use the buttons and
controls on the unit.
• To stop any time during editing process, press MD EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights.
2
Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE
function selected).
3
Rotate MULTI JOG until "ALL ERASE" is
selected.
4
Press SET.
• If you want to cancel the editing, press CANCEL.
5
Press ENTER.
MD EDIT SET
CANCEL
MD Loading slot
– 33 –
MULTI JOG
ENTER
0
6
Press 0 to eject the MD.
"WRITING" appears while the editing you have made
is being recorded on the MD.

Erasing a Portion of a Track

You can erase just a portion of one track by using the
DIVIDE, ERASE and JOIN functions.
• To do the following procedures, use the buttons and
controls on the unit.
• To stop any time during editing process, press MD EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
The MD IN lamp lights.
2
Press MD EDIT.
The MD recorder enters editing mode (with DIVIDE
function selected).
3
Divide a track into 3 portions to isolate the portion
to erase.
• Use the DIVIDE function by referring to page 29.
4
Erase the middle portion.
• Use the ERASE function by referring to page 32.
5
Join the two remaining portions.
• Use the JOIN function by referring to page 30.