Changing The Library Names-Lib. Name; Changing The Library Names (Lib. Name); You Can Change The Library Name As You Like - JVC CA-NXHD10R Instructions Manual

In the following examples of editing procedures, the
processes are explained assuming that the unit is turned on.
• To exit from the editing screen any time during the
process, press TITLE/EDIT.
• To return to the previous screen any time during the
process, press CANCEL.
• You cannot enter Title/Edit modes during Random
play and Search Modes.
• Library play, Album play, and Repeat play are
canceled when you press TITLE/EDIT (Continuous
play will resume).
Changing the Library Names—LIB. NAME
You can change the library names as you like.
• The maximum number of the characters used for each
library name is 64.
• You cannot change the names for "Library TUNER" and
"Library CD."
• Once you change a library name, the changed name will
appear instead of the original library name.
• When you want to change the album titles or the track
titles, see "Assigning Titles to Albums and Tracks" on
page 53.
On the remote control ONLY:
1
Press TITLE/EDIT repeatedly until "LIB. EDIT?"
appears in the main display.
• The source changes to "HDD" automatically if
another source has been selected.
• Each time you press the button, Title/Edit Modes
change as follows:
TITLE?
LIB. EDIT?
(Library edit)
Canceled
2
Press SET.
ALBUM EDIT?
TRACK EDIT?
– 57 –
3
Press SET again.
The unit enters the library name entry mode.
Currently selected library appears.
4
Press LIBRARY to select a library ("Library 1"—
"Library 10") you want to change the name of, then
press SET.
The library name entry screen appears in the main
display.
Character entry
position
Ex. When selecting "Library 9"
5
Press CANCEL repeatedly until the previous name is
completely erased.
6
Enter a new name referring to step 5 on page 53.
7
Press ENTER.
"HDD WRITING" appears and the HDD lamp flashes
in red while the editing you have made is being stored
in the HDD.
• If you have performed the above procedure during
play, HDD playback stops.
To restore original library names (when shipped from
the factory)
Erasing all characters assigned to a library restores its
original library name ("Library 1"—"Library 10").
Character set