Changing The Picture Tone - JVC HX-D77 Instructions Manual

Changing the Picture Tone

While showing a playback picture on the TV, you can select
the preset picture tone, or adjust it and store your own
preference.
To select a preset picture tone
1
Activate VFP.
2
Select a preset picture tone.
NORMAL
CINEMA
USER1/USER2
3
Finish setting.
Downloaded From Disc-Player.com JVC Manuals
Remote
ONLY
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST 0
0
NORMAL SATURATION
0
GAMMA
BRIGHTNESS 0
TINT 0
CONTRAST 0
SATURATION 0
SHARPNESS 0
TINT 0
SHARPNESS 0
On the TV screen
Normally select this.
Suitable for a movie source.
You can adjust parameters and can
store the settings (see the next
column).
To adjust the picture tone
INFO
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained above.
2
Select a parameter you want to adjust.
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
5
Finish setting.
Adjust if the neutral color is bright or
dark. The brightness of dark and
bright portions is maintained
(–3 to +3).
Adjust if the picture is bright or dark
as a whole (–8 to +8).
Adjust if the far and near position is
unnatural (–7 to +7).
Adjust if the picture is whitish or
blackish (–7 to +7).
Adjust if the human skin color is
unnatural (–7 to +7).
Adjust if the picture is indistinct
(–8 to +8).
18