Janome Memory Craft 10001 Instruction Manual page 61

Janome MC10001 Instruction Manual
5
Sensor BH
Now sewing.
Step 1
Raise Presser Foot.
6
7
www.aaasewing.com
Auto
Step 3
Step 2
Completed.
11
5 Press the Start/Stop Button to sew the
buttonhole. The buttonhole will be
R
automatically sewn in a single step.
Step 1: The machine will sew the front
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back
To repeat buttonhole sewing
To sew another buttonhole, raise the presser
foot and move the fabric to where the next
buttonhole is sewn, then lower the foot and
start the machine.
6 When buttonhole sewing is finished, push
the buttonhole lever upward as far as it will
go.
7 Remove the fabric and place a pin just
below the bartack at each end to prevent
10
accidentally cutting bartacks.
Cut the opening with the Seam Ripper.
Use an Eyelet Puncher to open a
keyhole buttonhole.
10 Seam Ripper
11 Eyelet Puncher
60
bartack and the left row first.
Then it goes back to the starting
point with straight stitch.
bartack, and the machine will stop
automatically.
MC10001 Owners Manual/ User Guide