Janome Memory Craft 10001 Instruction Manual page 16

Janome MC10001 Instruction Manual
1
2
3
4
www.aaasewing.com
1
2
4
3
5
Using the Automatic Needle Threader
1 Hold the end of the needle thread
gently.
NOTE:
• Make sure to raise the needle by pressing
the Up/Down Needle Button.
2 Press the Auto Needle Threader
Button. The threader lowers
automatically and the hook comes out
through the needle eye from behind it.
3 Pull the thread down around the Thread
Guide, then pass the thread from
the right and under the Hook as
shown.
1 Thread Guide
2 Hook
NOTE:
• The Visual Touch Screen will show
step-by-step instruction diagrams.
4 Draw the thread to the left and slip it into
the slit of the Thread Holder from the
bottom and cut the thread with the
Thread Cutter as shown.
3 Thread Holder
4 Thread Cutter
NOTES:
• You may hold the thread end by your
hand when threading certain kinds of
threads.
• When threading filament thread, hang the
thread end on the Thread Holder on
the face plate.
5 Thread Holder
15
MC10001 Owners Manual/ User Guide