Janome Memory Craft 10001 Instruction Manual page 153

Janome MC10001 Instruction Manual
A
Z
2
4
5
www.aaasewing.com
B:140x200mm
Copy
Size
B
Color
Cancel
OK
Edit
3
B:140x200mm
A(F)
A(F):126x110mm
Size Copy
B
Color
C:50x50mm
Size
Cancel key
When you press the
3
have been made to the selected pattern will be
cancelled.
2 Cancel Key
NOTE:
• When there is more than one pattern on the
Edit screen, any changes to the pattern
cannot be cancelled after another pattern
has been selected.
Selecting the hoop size
In the Edit window, you need to select the
appropriate size of the embroidery hoop by
2
pressing the
There are three hoop size selections:
* Standard Hoop A, 12.6 cm (5˝) by 11cm
(4 3/8˝)
* Big Hoop B, 20 cm (8˝) by 14 cm (5 1/2˝)
* Free-arm Hoop C, 5 cm (2˝) by 5 cm (2˝)
3 Hoop Selection Key
B C
NOTES:
• It is always necessary to select the correct
hoop size after you open the Edit Screen.
• Free-arm Hoop C is sold separately.
• Whenever the Edit screen opens, Big Hoop
B is the initial hoop setting.
4 The layout boundary for Standard Hoop A
• The red frame indicates the edit boundary.
When you layout the patterns, make sure the
patterns will fit inside the red frame.
5 The layout boundary for Free Arm Hoop C
• The red frame indicates the edit boundary.
When you layout the patterns, make sure the
patterns will fit inside the red frame.
CAUTION:
• Make sure to use the specified hoop,
Copy
otherwise the needle will hit the embroidery
hoop.
• When the correct embroidery hoop is not
chosen, the design exceeds the edit
boundary and you cannot embroider the
B
design.
• For big patterns, choose the Big Hoop B.
Color
152
key, any changes that
key.
MC10001 Owners Manual/ User Guide