Main/Sub Setting - Daikin SkyAir GQI-Eco Series Service Manual

Wireless Remote Controller
2.3

MAIN/SUB Setting

Introduction
To set the wireless remote controller, you have to set the address for:
Setting the Address for the Receiver
When using both a wired and a wireless remote controller for 1 indoor unit, the wired controller
should be set to MAIN. Therefore, set the MAIN/SUB switch (SS1) of the receiver to SUB.
20
The receiver of the wireless remote controller
The wireless remote controller.
MAIN/SUB MAIN
MAIN/SUB
S
switch (SS1)
M
SUB
S
M
SiBE281013
Remote Controller