Panasonic KX-NCP Series Software Manual page 26

4.1 Installing and Starting CA Client
Select your operating mode:
•
Standard user (CA Pro): Log in using Pro mode.
•
Standard user (CA Basic-Express): Log in using Basic-Express mode.
•
Operator Console (CA Operator): Log in using Operator Console mode.
•
ICD Group Supervisor (CA Supervisor): Log in using Supervisor mode.
Note
See Feature Comparison (Page 16) for a summary of the different modes.
Check the following features to use them in CA Client:
•
Use softphone: The IP Softphone will load automatically each time CA Client is started. An IP
Softphone activation key for your extension is required to use this feature.
•
Use Network: You can view other PBX's contact lists and use CA features over a network connection.
CA Server and a network activation key are required to use this feature.
3.
Click Save.
4.
Enter the IP address and port number of the CA Server you are connecting to. If connecting directly to a
PBX, enter the IP address and port number of the PBX instead. Then, enter your extension number and
password.
If this is the first time you are logging in for the extension, leave the password blank.
26 Quick Reference Guide