Removing The Starter Motor; Removing The Flywheel Magneto - PIAGGIO Beverly 250 USA Workshop Manual

Beverly 250 USA

Removing the starter motor

- Remove the two screws indicated in the figure.
- Take the starter motor out of its seat

Removing the flywheel magneto

- Lock the rotation of the Flywheel with the calliper
spanner tool.
- Remove the nut.
- Take out the flywheel.
CAUTION
THE USE OF A CALLIPER SPANNER OTHER
THAN THE ONE SUPPLIED COULD DAMAGE
THE STATOR COILS
Specific tooling
020565Y Flywheel lock calliper spanner
008564Y Flywheel extractor
- Remove the water pump shaft and crankshaft
spline clip
Engine
ENG - 27