Configuration - Garmin GTX 330 Installation Manual

5.2 CONFIGURATION PAGES
The configuration descriptions given in this section reflect software
version 3.03.
Holding down the FUNC key and pressing the ON key provides access to the configuration pages. The FUNC
key sequences forward through the configuration pages. The START/STOP key reverses through the pages,
stopping at the Menu page. The CRSR key highlights selectable fields on each page. When a field is highlighted,
the 0 – 9 keys enter numeric data and the 8 or 9 keys move through list selections. Press the CRSR key to accept
changes. When a field is highlighted, pressing the FUNC key moves to the next configuration page without
saving the changes.
Changes made through the configuration pages are stored in EEPROM memory. To exit the configuration pages,
turn the power off. Then turn on again (without holding the FUNC key) for normal operation.
The configuration page sequence is as follows (menu categories are listed in parentheses):
•
'Jump To' Menu
•
Audio and Messages #1
•
Audio and Messages #2
•
Traffic Messages
•
Display Mode
•
Display Backlight
•
Key Backlight
•
Contrast
•
ARINC 429 Input #1 (First I/O Configuration page)
•
ARINC 429 Input #2 (Second I/O Configuration page)
•
ARINC 429 Output
•
RS-232 Input Output
•
Operation Configuration #1 (First Aircraft Configuration page)
•
Operation Configuration #2 (Second Aircraft Configuration page)
•
Temperature
•
Aircraft Address
•
Flight ID
•
Aircraft Type
•
Gray Code Input
•
External Switch State
•
Analog Input
•
RS-232 Input Display
•
ARINC 429 Input Display #1
•
ARINC 429 Input Display #2
GTX 330 Installation Manual
190-00207-02
NOTE
Page 5-5
Rev E