Garmin GTX 330 Installation Manual page 48

FORMAT (Altitude Format)
This field determines how the pressure altitude is shown on the GTX 330 display.
SELECTION
FLIGHT LVL
(Flight Level)
FEET
METERS
VFR ID (VFR Transponder Code)
This field is the four-digit code that is selected when the user presses the GTX 330 VFR key. In the United
States, 1200 is the VFR code for any altitude. The default is set to 1200.
ALTITUDE ALERT DEVIATION (Altitude Format)
This field determines the amount of altitude difference from selected altitude to generate an altitude alert
deviation. It is set to 200 feet, the minimum altitude, at the factory.
SQUAT SWITCH
The squat switch field may be set to either YES or NO. Selecting
YES in this field sets the GTX 330 to use the squat switch to
determine lift off. Selecting NO sets the GTX 330 to use Automated Airborne Determination from other sources.
DELAY TIME
This is the number of seconds the aircraft must be on the ground before the AUTO STANDBY feature
automatically switches to standby mode when the airborne source is the squat switch. It has a range of 0 (zero)
seconds to 99 seconds, with the default set to 24 seconds.
AUTO FLIGHT TIMER
Available choices are MAN, CLEAR and ACCUM. Selecting CLEAR resets flight time to zero and starts the
flight timer when lift off is sensed.
Selection
MAN
CLEAR
ACCUM
Page 5-14
Rev E
DESCRIPTION
DEFAULT. The pressure altitude is displayed in hundreds of feet. For
example, a pressure altitude of 12,300 feet is displayed as "FL 123".
Pressure altitude is displayed in feet.
Pressure altitude is displayed in meters.
Description
Manual selection. DEFAULT. Flight timer START/STOP is controlled
manually by the pilot.
Automated flight timer START/STOP resets to zero at every lift off.
Automated flight timer START/STOP accumulates, meaning, it continues
counting up at lift off.
Second CONFIGURATION Page
GTX 330 Installation Manual
190-00207-02