Rs-232 Input And Output Page; Operation Configuration Pages - Garmin GTX 330 Installation Manual

5.2.9

RS-232 INPUT and OUTPUT Page

RS-232 INPUT (Altitude Source, GPS Data)
This is the electrical source for the GTX 330 altitude and GPS data input. Refer to section 4.4.4 for altimeter data
selection priority.
SELECTION
OFF
GPS
ICARUS ALT
ADC NO ALT
ADC W/ALT
SHADIN ALT
FADC NO ALT
FADC W/ALT
REMOTE
RS-232 OUTPUT (Altitude Source)
SELECTION
OFF
ICARUS ALT
REMOTE
REMOTE + TIS
5.2.10

OPERATION CONFIGURATION Pages

VS RATE (Vertical Speed Rate)
This field is the typical vertical speed for climb/descent of the aircraft. The settable number determines the rate of
climb the GTX 330 assumes as liftoff for starting the flight timer and operational functions. The range is 100 feet
per minute to 9999 feet per minute, and is set to 500 fpm at the factory.
GTX 330 Installation Manual
190-00207-02
DESCRIPTION
DEFAULT. The altitude code input is not from an RS-232 source.
RS-232 ground speed from a GPS device.
RS-232 serial altitude from an Icarus Instruments 3000.
RS-232 serial air data information from Shadin ADC 200, 200+, 2000.
RS-232 serial air data information from Shadin ADC 200, 200+, 2000 plus
altitude data.
RS-232 serial altitude from Shadin 8800T, 9000T, 9200T.
RS-232 serial air data from Shadin 9628XX-X family of Air Data
Computers and Fuel/Air Data Computers.
RS-232 serial air data from Shadin 9628XX-X family of Air Data
Computers and Fuel/Air Data Computers plus altitude data.
RS-232 serial input remote data. Reserved for future use.
DESCRIPTION
DEFAULT for channel 2. No unit is connected to output of this channel.
DEFAULT for channel 1. RS-232 serial altitude from an Icarus
Instruments 3000.
RS-232 serial output remote data. Reserved for future use.
RS-232 serial output remote data with TIS.
RS-232 INPUT-OUTPUT Page
First CONFIGURATION Page
Page 5-13
Rev E