Error Messages - Panasonic KX-FPC185C Operating Instructions Manual

Compact plain paper fax with 900 mhz digital cordless phone and answering system
Table of Contents

Advertisement

Error Messages

J
NO FAX REPLY
L The other party's fax machine is busy or has
run out of recording paper. Try again.
NO TAD GREETING
L Your TAD/FAX greeting message is not
recorded. Record a message (page 73).
L The voice guidance feature is set to off.
Activate feature #47 on page 94. Pre-
recorded greeting message will be adopted.
NO TRNS-GREETING
L Your transfer greeting message is not
recorded. Record a message (page 87).
L The voice guidance feature is set to off.
Activate feature #47 on page 94. Pre-
recorded greeting message will be adopted.
PAPER JAMMED
L A recording paper jam occurred. Clear the
jammed paper (page 106).
PLEASE WAIT
L The unit is checking that there is no slack on
the ink film. Wait for a moment while the
check is completed.
REDIAL TIME OUT
L The other party's fax machine is busy or has
run out of recording paper. Try again.
REMOVE DOCUMENT
L The document is jammed. Remove the
jammed document (page 109).
TRANSMIT ERROR
L A transmission error occurred. Try again.
98
UNIT OVERHEATED
L The unit is too hot. Let the unit cool down.
Handset
Directory full
L There is no space to store new entries in the
navigator directory. Erase unnecessary
entries (page 45).
No link to base
Place on cradle
and try again.
L The handset has lost communication with the
base unit. Move closer and try again.
L Place the handset on the base unit and try
again.
L The power cord is disconnected. Plug in the
power cord.
Not available
L { { { { > > > > } } } } , { { { { e} } } } , { { { { v} } } } , { { { { FLASH, CALL WAIT/
PLAYBACK} } } } or { { { { CLEAR, HOLD,
INTERCOM} } } } was pressed while the base
unit was in use.
Please lift up
and try again.
L { { { { < < < < } } } } , { { { { > > > > } } } } , { { { { e} } } } or { { { { v} } } } was pressed while
the handset was on the base unit. Lift the
handset and press the button again.
Save error
L While programming, the handset has lost
communication with the base unit. Move
closer to the base unit.

Advertisement

Table of Contents
loading

Table of Contents