Sending A Fax Using The Navigator Directory - Panasonic KX-FPC185C Operating Instructions Manual

Sending Faxes

Sending a fax using the navigator directory

Before using this feature, program the desired names and telephone numbers into the navigator
directory (page 41).
Document guides
{>}{+}{-}
{FAX/START}
1
Adjust the width of the document guides to
the size of the document.
2
Insert the document (up to 10 pages) FACE
DOWN until a single beep is heard and the
unit grasps the document.
3
If necessary, press { { { { + + + + } } } } or { { { { - - - - } } } } repeatedly
to select the desired resolution (page 55).
4
Press { { { { > > > > } } } } .
5
Press { { { { + + + + } } } } or { { { { - - - - } } } } to display the desired
entry and press { { { { FAX/START} } } } .
L If the desired name has not been stored
in the navigator directory, press
{ { { { STOP} } } } and dial the number manually.
58
{STOP}
STANDARD
PRESS NAVI.[+ -]
DIRECTORY [+ -]
<MAILBOX>)
Fax auto redial
If the line is busy or if there is no answer, the unit
will automatically redial the number up to 2
times.
L This feature is also available for delayed
transmission (feature #25 on page 92).
L During redial, the following will be displayed.
L To cancel redialing, press { { { { STOP} } } } .
If your unit does not send a fax
L Confirm the stored telephone number on the
display and check that the number dialed is
answered by the other party's machine.
L The connecting tone will be heard during
dialing to tell you the status of the other
party's machine (feature #76 on page 95).
WAITING REDIAL